To paint or repaint steel, Valmour proposes different types of products. We recommend to proceed according to the following steps:
A- THOROUGH PREPARATION OF THE SURFACE :
- Rust elimination : if the surface ist rusty, eliminate superficial non adhering or crumbly rust by brushing or sanding. If afterwards there still remains visible rust residue, use Stop Rust Converter Valmour (which deteriorates to the detriment of the rust, therefore the protection is in proportion to the quantity of product applied). Without visible rust residue, it is useless to apply Stop Rust, you can start to paint dierectly. After sanding the metal is exposed and fragile : you need to paint it within 24 hours.
- Stripping : if necessary, eliminate previous coats of paint by brushing or sanding them or by using a stripper: Gel Stripper DECAPBIO 2 VALMOUR
- Grease elimination : Apply paint only onto a clean, dry and completely greaseless surface. To eliminate grease, you can use acetone or our DILUVAL.
B- FINISHING :
This is the actual painting, which will give the final appearance to the surface. We propose 2 distinctive methods:
1) Monocomponent formula with a ready-to-use paint:
Choose between 3 different appearances:
- matt: use Triplemat FLAMBO
- satiny : use TOLEMAIL Special Ironwork
- shiny : use Super Shiny Lacquer FLAMBO
This is the most practical solution, of very good quality for the demanding non-professional.
Afterwards, it is possible to complete the finishing with a protecting varnish to increase the lifespan of the paint, and thereby prolonging the intervals between renovations: use Marine Varnish Louis XIII. This step is optional.
3- PROTECTION :
This step is optional and allows to complete the finishing by adding a protective varnish to increase the life span of the paint, and thereby prolonging the intervals between renovation.
Use MARINE VARNISH LOUIS XIII
2- Professional formula with bi-component epoxy and polyurethane products:
- first apply Valmour Rust Stop Converter
- then cover with our Laquer paint omnilaque VALMOUR
This is the most qualitative solution, a little more complex to apply, but giving a perfect result and the most durable over time.
Tel. : +33 (0)5 45 70 80 80
For any professional use of this advice card, please contact us.
Adhesive Tape for Painting
Protective paper tape for painting. Remarks : Can be torn with your hands. Width 19 mm. Length 50 m.
Inc. VAT
Details
Gel Stripper DECAPBIO 2 Valmour
High performance gel stripper for paints and varnishes. Can be used on many surfaces like wood, ferrous metal, cement etc. Thanks to its gel form Gel Stripper DECAPBIO 2 Valmour is perfectly suitable for vertical surfaces. Over 95 % biodegradable formula without methylene chloride, methanol, phenol or paraffin. Remarks : Easy rinsing with water. For interior ...
Inc. VAT
Details
Paint Triple Mat FLAMBO
Matt filling oil-based paintintended forall types ofsurfaces. Paint Triple Mat FLAMBO is the historic formula for blackboards, does not run and can be used for the following materials: metal: steel, copper, brass, chrome, aluminium etc. solid wood or chipboard. soft or hard plastic like PVC or polyester. plaster, plasterboards (ceilings for example). ...
Inc. VAT
Details
Super Shiny Lacquer Paint FLAMBO
Quick drying oil-based lacquer paint. High covering properties on allsupports, does not run. Gives a very hard lacquered surface, washable, brushable and weather resistant. Shiny appearance. Interior/exterior use. Remarks : Can beapplied on allsupportsexcept plaster and fresh concrete, with a Brush, a Roller, a gun orby airless. Average use approx. 15 m²/liter/coat. ...
Inc. VAT
Details
STOP RUST Converter Valmour
Maintenanceproduct for steel and rust. Stops the rust and transforms it into a protective and very decorative deep blue-black coat, which accepts all finishes without primer. STOPRUST Converter Valmour alsoallows to decorate new metal by giving it a beautiful "gun barrel" patina. This formula deactivates the rust and prevents its participation in the oxydation process. Quick reaction ...
Inc. VAT
Details