We propose a professional high performance system based on bi-component paint.
1- PREPARATION :
. To begin with, make sure that the surface to be treated is clean by brushing it with the Steel Brass Brush LOUIS XIII. Avoid sandblasting, but eliminate all traces of grease on the surface with our DILUVAL Thinner below.
. Afterwards, to increase the hold of the finishing paint and to clean, apply the following mixture: 90% water and 10% hydrochloric acid. Spray onto the surface, leave to work and rince with DILUVAL Thinner VALMOUR below. This product will prepare galvanized steel in particular to be painted with the following products. It also perfectly cleans the surface to be painted, and can be applied even on rust.
. To prevent any increase of residual rust, apply STOP RUST Converter.
Remarks : On galvanized steel, we do not recommend WASH PRIMER because it doesn't protect against corrosion and would therefore make it necessary to apply an appropriate primer afterwards. Use for aluminium, stainless steel, ...
2- FINISHING :
Lastly, depending on the appearance you want to obtain and your budget, choose the finishing paint according to the following criteria:
. Shiny finish : use OMNILACQUER Paint VALMOUR, which is particularly resistant against bad weather conditions. This professional bi-component polyurethane lacquer is ideal for surfaces exposed to bad weather conditions, in particular in a marine environment. To begin with, apply a coat of ANTIRUST EPOXY PRIMER VALMOUR everywhere you are going to paint to increase the hold of the OMNILAQUER finishing paint. This primer also protects against corrosion, which is essential, even if your galvanized steel is not oxidized.
Afterwards, you can complete the finishing by adding a protective varnish to increase the life of the paint, and thereby prolonging the intervals between renovation.
. Satiny finish: with TOLEMAIL Special Ironwork. This monocomponent anti-corrosion paint can be applied without a primer.
. Matt finish: with Triple Mat FLAMBO, an oil-based monocomponent paint for all surfaces.
Tel. : +33 (0)5 45 70 80 80
For any professional use of this advice card, please contact us.
Adhesive Tape for Painting
Protective paper tape for painting. Remarks : Can be torn with your hands. Width 19 mm. Length 50 m.
Inc. VAT
Details
Paint Triple Mat FLAMBO
Matt filling oil-based paintintended forall types ofsurfaces. Paint Triple Mat FLAMBO is the historic formula for blackboards, does not run and can be used for the following materials: metal: steel, copper, brass, chrome, aluminium etc. solid wood or chipboard. soft or hard plastic like PVC or polyester. plaster, plasterboards (ceilings for example). ...
Inc. VAT
Details
STOP RUST Converter Valmour
Maintenanceproduct for steel and rust. Stops the rust and transforms it into a protective and very decorative deep blue-black coat, which accepts all finishes without primer. STOPRUST Converter Valmour alsoallows to decorate new metal by giving it a beautiful "gun barrel" patina. This formula deactivates the rust and prevents its participation in the oxydation process. Quick reaction ...
Inc. VAT
Details
TOLEMAIL Special Ironwork
Special Ironwork Lacquer Paint, high resistance anti-rust treatment,marine quality for steel and cast iron : railings, steel frames, wrought iron etc. Remarks: Apply in one or two coats with a paint brush, roller or spray gun. For an application by spray gun , dilute at 10 % with White Spirit Average use approx. 10 ...
Inc. VAT
Details
Lacquer Paint OMNILAQUE VALMOUR
Bi-component shiny polyurethane lacquer paint for the protection and finishing of metal surfaces like tool and agricultural machines, truck bodies, silos, containers, vats, garden furniture and metal fittings etc... Remarks : Shiny stretched appearance. Interior and exterior use. Average use approx. 10 m²/kg/coat. Apply in one or two coats after applying a primer (see technical ...
Inc. VAT
Details
