Finish recommended for light or dark rustic wood and all wood types with a pronounced grain (oak, chestnut etc..), which fills the wood pores, livens up the grain and gives a nice shine.
To enhance the wood shade, apply Woodwork Stain LOUIS XIII or Nut Husk LOUIS XIII before.
Proceed according to the following2 steps:
1- Base preparation : apply a generous coat of Special Wax Paste with Pore Filler LOUIS XIII to the wood, then add Pumice Powder LOUIS XIII on top. Rub with an Applicator in circles to fill the pores. Add wax or pumice powder if needed. Continue until the pores are filled sufficiently. Let dry for 4 hours. Then level the surface with a new applicator soaked in Polish Thinner. Let dry for 1 hour and lightly brush afterwards with Steel Wool LOUIS XIII N° 0000.
2- Finish : apply a coat of Tinting Polish Paste LOUIS XIII with a Cloth. Let dry for 4 hours, then shine with a Shining Glove Valmour. The wood is protected and shiny and gives off a natural turpentine scent.
Tel. : +33 (0)5 45 70 80 80
For any professional use of this advice card, please contact us.