To recover the raw wood, generously apply Wood Cabinet Stripper LOUIS XIII with a Brush. Let it work for 15-20 minutes, then scrape off with a Coating Knife on flat surfaces and with Steel Wool LOUIS XIII N°2 on the mouldings. If necessary, repeat the operation, then rinse the surface with the Steel Wool LOUIS XIII soaked in Wax Remover LOUIS XIII to eliminate any stripper residue. Sand with Glasspaper (120 or 180) and dust off.
Tel. : +33 (0)5 45 70 80 80
For any professional use of this advice card, please contact us.
Black Nitrile Rubber Glove
Now available in the new colour orange, as well as in black !Powder-free Black Mamba protective glove.Black Mamba Gloves are made of nitrile rubber, ultra-high resistance, 3 times ...
Details
Box of 100 Black Nitrile Rubber Gloves
Box of 100 powder-free nitrile rubber gloves.Nitrile rubber, ultra-high resistance, 3 times superior to latex or vinyl, in particular to solvents.These gloves are paractical, very supple, solid, practical ...
Details
Mastic Knife VALMOUR
Painter's mastic knife made of steel with a flexible blade.
Details
Cotton Cloths for DIY
Cotton cloths cut from cotton sheets.This fabric is very hardwearing and absorbant and particularly adapted for DIY.The size can vary from 20 cm to 40 cmside-length. Available per unit or ...
Details
Wax and Dirt Remover LOUIS XIII
Special formula based on poppy seed oil to clean furniture and wood panelling without damaging the colours. Removes old coats of wax and eliminates water and alcohol stains etc... Gives back to ...
Details
