Use the following products which are intended for non-flat surfaces:

1- The base preparation is carried out with Insulating Wood Finish LOUIS XIII applied with Cottonstock LOUIS XIII. Let dry for 4 hours. Apply 2 coats, and finish lightly with Steel Wool N°0000 after complete drying (8 hours). Easy application.

2- To varnish, use Shellac Varnish LOUIS XIII, apply in thin coats with a soft and clean brush. Let dry for 2 hours minimum and repeat the operation until obtaining the desired result. After drying, it is possible to soften the coats with Steel Wool N° 0000. The shine obtained is similar to French Polishing. Varnish application  a room temperature between 18 to 20°C.

After in-depth drying (8 days), use Surfacing Equalizer Varnish LOUIS XIII to correct any surface irregularities, apply with rapid forward and backward movements in the sense of the wood grain, lightly touching the surface where the blemishes are situated.